FPV · freestyle · 6S
5-inch freestyle FPV build (2207, 6S)
The most popular 5-inch 6S freestyle pairing — aggressive flight, great throttle response, widely used for Betaflight tuning.
~485 g€4205" props
Edit in configuratorParts list
| Category | Component | Weight |
|---|---|---|
| frame | GEPRC 5" Freestyle Frame | 95 g |
| motor | iFlight 2207 1750KV | 32 g |
| esc | iFlight 45A 4-in-1 ESC | 12 g |
| fc | SpeedyBee F405 V3 FC | 8 g |
| vtx | RushFPV RushFPV Max Solo | 8 g |
| camera | Foxeer Racer Nano V3 | 5 g |
| battery | Tattu 6S 1300mAh 120C | 195 g |
| prop | Gemfan 5043 Tri-Blade | 4 g |
| receiver | BetaFPV EP2 RX ELRS | 2 g |
FAQ
- Is 2207 1750KV good for 6S?
- Yes — it is the standard 5-inch 6S freestyle pairing with 5043 props.
- Which licence is required?
- Most 5-inch builds need A1/A3; flying closer to people requires A2. See the FPV licence guide.
How to assemble
- 1
Assemble the stack
Stack ESC + FC on 30.5 mm standoffs, wire motors per Betaflight motor order.
- 2
Flash Betaflight
Use Betaflight Configurator — pick FC target, then calibrate ESC and accelerometer.
- 3
Tune PIDs
Start from a community preset, then blackbox tune throttle and prop wash.